This section contains information about setting up your instrument
and preparing to play. Please go through this section
carefully before turning the power on.
Power Supply
1. Before connecting to power supply, please set the [POWER]
switch to OFF and set the master volume to minimum level.
2. Connect the AC adaptor to the DC 12V jack of this keyboard.
3. Plug the AC adaptor into an AC outlet.
4. Press the [POWER] button, the LCD will be lit, which indicates the
instrument is powered on.
5. If you are ready to turn off the instrument, press the [POWER]
switch again.
Notes:
1. In order to save energy, the instrument will automatically shutdown
in 30 minutes if it is not used. (Please refer to Auto Power Off).
2. For your safety, please unplug the instrument when it is not in use
or during a thunderstorm.
Setting a Music Stand
A music stand is supplied with the instrument. You can easily attach it
to the instrument by inserting it into the slots at the rear of the panel.
Connecting a Sustain Pedal
An optional footswitch can be plugged into the sustain jack and
be used to switch sustain on or off. Simply by pressing the pedal, you
will have a natural sustain as you play.
Connecting a Volume Pedal
An optional volume control can be plugged into the volume jack for
adjusting the volume of sound.
Setup
07
AUX.IN
USB
POWER
C
M
Y
CM
MY
CY
CMY
K
AW_A810_Manual_G01_170809.pdf 7 17/8/9 16:21
To Next Page
Loading...
Need help?
General
