Medeli AW830 - Chorus Type and Level; MIDI and Auto Power Off

Chorus Type
1. Press the [FUNCTION+]/[FUNCTION-] buttons to select the Chorus
Type menu. The LCD shows “004 GM Chr2”. Use the [+/YES]/[-/NO]
buttons or data dial to change the chorus type.
2. Pressing [+/YES] and [-/NO] at the same time will reset to the default
chorus type “004 GM Chr2”.
Detailed chorus types:
Chorus Level
Press the [FUNCTION+]/[FUNCTION-] buttons to select the Chorus
Level menu. LCD shows “Chr Lev”. Use [+/YES]/[-/NO] or data dial to
change chorus level. The level ranges from 0 to 127.
MIDI In
Press the [FUNCTION+]/[FUNCTION-] buttons to select the MIDI In
menu. Use [+/YES]/[-/NO] buttons or data dial to select the channel.
The default setting is “ALL”, channel 1~16 can also be selected.
MIDI Out
Press the [FUNCTION+]/[FUNCTION-] buttons to select the MIDI Out
menu. Use [+/YES]/ [-/NO] buttons or data dial to select the channel.
The default setting is “001”, channel 2~16 can also be selected.
Auto Power Off
This function will set the time after which the instrument will shut down if
it is not used.
1. Press the [FUNCTION+]/[FUNCTION-] buttons to select the Power
Off menu. Use [+/YES]/[-/NO] or data dial to change the setting over
the range: OFF, 30, 60.
2. Press [+YES] and [-/NO] simultaneously, the time will be reset to
default: 30 minutes.
Other Functions
27
No.
1
2
3
4
5
6
7
8
LCD Display
Chorus1
Chorus2
GM Chr1
GM Chr2
Flanger1
Flanger2
Rotary1
Rotary2
Chorus Type
Chorus 1
Chorus 2
GM Chorus 1
GM Chorus 2
Flanger 1
Flanger 2
Rotary 1
Rotary 2
C
M
Y
CM
MY
CY
CMY
K
AW_AW830_Manual_G03_171207.pdf 27 17/12/12 17:59