This section contains information about setting up your instrument
and preparing to play. Please go through this section
carefully before turning the power on.
Power Supply
1. Make sure that the piano is turned off. Before you switch your
piano on or off, turn down the volume of piano and any
connected audio equipments first.
2. Connect the AC adaptor to the DC IN jack on the rear panel.
3. Plug the AC adaptor into an AC outlet.
4. Press the [POWER] switch. The LCD will light up, indicating the
instrument is powered on.
5. When you are ready to turn off the instrument, press the [POWER]
switch again.
Notes:
1. In order to save energy, the instrument will automatically shut down
in 30 minutes when not in use. (Please refer to Auto Power Off).
2. For your safety, please unplug the instrument when it is not in use
or during a thunderstorm.
Setting a Music Stand
A music stand is supplied with the instrument. You can easily attach it
to the instrument by inserting it into the slots at the rear of the panel.
Connecting a Sustain Pedal
An optional footswitch can be plugged into the sustain jack and
be used to switch sustain on or off. Simply by pressing the pedal, you
will have a natural sustain as you play.
Connecting a Volume Pedal
An optional volume control can be plugged into the volume jack for
adjusting the volume of sound.
Setup
07
C
M
Y
CM
MY
CY
CMY
K
AW_AW830_Manual_G03_171207.pdf 7 17/12/12 17:59
To Next Page
Loading...
