Medeli ELECTRONIC KEYBOARD - Other Functions; Turning the Metronome ON;OFF; Tuning; Selecting the Beat

Other Functions
Turning the Metronome ON/OFF
Tuning
Selecting the Beat
Setting the Transpose
Press the [Metronome] button to turn the metronome on.
Press the [Metronome] button again to turn the metronome
off.
1.
2.
Press the [FUNCTION] button.
Select “TUNE”.
Use [FUNCTION], [BACK] or [NEXT] button to select TUNE.
The LCD displays the tune value. The value ranges from -50
to 50 and the default value is 0.
The function sets the overall pitch of the instrument.
Change the tune value.
Use the data dial, [+/YES] or [-/NO] button to change the
tune value.
Press [+/YES] and [-/NO] simultaneously to set the default
tune value.
1.
2.
3.
Press the [FUNCTION] button.
Select “BEAT”.
Use [FUNCTION], [BACK] or [NEXT] button to select BEAT.
The LCD displays the beat value. The value ranges from 2-9
and 0. The default value is 4.
Change the beat value.
Use the data dial, [+/YES] or [-/NO] button to change the
beat value.
Press [+/YES] and [-/NO] simultaneously to set the default
beat value.
1.
2.
3.
Press the [FUNCTION] button.
Select “XPOSE”.
Use [FUNCTION], [BACK] or [NEXT] button to select
XPOSE. The LCD displays the transpose value. The value
ranges from -12 to 12 and the default value is 0.
This function allows the overall pitch of the instrument to be
transposed up or down by a maximum of one octave in
semitone increments.
Change the transpose value.
Use the data dial, [+/YES] or [-/NO] button to change the
transpose value.
Press [+/YES] and [-/NO] simultaneously to set the default
transpose value.
1.
2.
3.
GrandPn1
Tune
METRONOME
FUNCTION
Xpose
FUNCTION
Beat
FUNCTION
29
BACK NEXT
BACK NEXT
BACK NEXT