C
C
O
O
N
N
N
N
E
E
C
C
T
T
I
I
N
N
G
G
12
Connecting
For a better guidance, open up the left inner page of the
cover with the diagrams to find the location of the de-
scribed connections.
Note:
The devices listed are not necessarily included with
your PC.
All the connections listed are optional and will not
inevitably be available on your PC.
Cabling
Please follow the instructions below in order to correctly connect
your PC:
• Arrange cables in such a way that no one can tread on or
trip over them.
• Do not place objects on the cables.
• To avoid damage to your PC, connect your peripherals (e.g.,
keyboard, mouse and monitor) whilst your PC is powered
off. Some devices can be connected whilst your PC is in use.
These devices usually have a USB or IEEE 1394 connector.
Please follow the appropriate instructions for each
device.
• Keep the PC at least one meter (approximately three feet)
away from high frequency and magnetic interference
sources (e.g., televisions, loudspeaker cabinets, mobile
telephones, etc.) in order to avoid malfunctions and/or loss
of data.
• Please note that only shielded cables shorter than
3 metres (9.84 ft) should be used for the LPT, COM, USB,
IEEE 1394, audio, video and network interfaces with this PC.
• To avoid EMC issues, make sure that all devices are con-
nected to each cable or that cables not in use are removed
from the computer.
To Next Page
Loading...
