T
T
H
H
E
E
N
N
E
E
T
T
W
W
O
O
R
R
K
K
52
Troubleshooting within the network
Why does the network environment not show the re-
leases?
The network environment is delayed in time. Check
the release by searching for the respective com-
puter name.
Why does an error message appear when I click on the
network environment?
The computer name must be unique on the net-
work and may not be the same as the task group.
It appears that the network boards are unable to com-
municate. What might be the problem?
Maybe one of the used network boards works with a
different speed (e. g. 10 instead 100 Mbit) and
your network computer is unable to recognize this.
If necessary, set the network driver to the compati-
ble speed.
If two PCs should be linked you require a cross-
link cable, otherwise use a patch cable.
In addition, check the protocols and the configu-
ration.
The data transmission is incorrect or very slow. What
might be the problem?
Maybe you have the wrong cable (UTP / CAT3 or
lower) or the problem is the proximity of a power
cord or another source of interference.
For further hints on troubleshooting refer to the Windows help
under “Network errors”.
To Next Page
Loading...
