Medion PC - Connecting the Power Supply

Safety Connecting Operation Help Appendix
S
S
E
E
T
T
T
T
I
I
N
N
G
G
U
U
P
P
&
&
G
G
E
E
T
T
T
T
I
I
N
N
G
G
S
S
T
T
A
A
R
R
T
T
E
E
D
D
25
Connecting the power supply
Diagram reference: X, X2
Finally, connect the power supply to your PC and monitor, by
plugging the power cord into the outlet.
Observe the following safety precautions:
Please note
Even with the power switch switched off some parts of
the device receive current. You must unplug the power
plug from the socket, if you want to interrupt the
power supply to your PC or cut off your device from
current entirely.
• The power socket must be in the vicinity of the PC and
within reach of the power cables. Do not stretch the
power cables tightly to reach a power socket.
• Only operate the PC on grounded plugs of the domestic
power net.
• Use only the supplied power cord.
• To provide additional protection against electric shock,
power surges, lightning strikes, or other electrical damage
to your PC, we recommend the use of a surge protector.
• If you are using an extension cord, ensure that the cord
meets your local safety requirements. If in doubt, ask an
electrician.
• The power supply unit has an On/Off switch (X2) that can
be used to power off the PC. When the switch is Off (0) no
power is being consumed.
Do not start your PC yet!
First, read the following section to find out what you need to know
in order to get started.