C
C
U
U
S
S
T
T
O
O
M
M
E
E
R
R
S
S
E
E
R
R
V
V
I
I
C
C
E
E
76
Errors and possible causes
The monitor is blank.
• Confirm that the system is not in stand-by mode. Press any
key on the keyboard to test this out.
Wrong Date and Time:
• Double-click the clock on the taskbar and correct the date
and time.
After a system restart a new drive letter is assigned to the
cards in the card slots.
• This can happen, when the card reader re-initializes the
slots during a system start. New IDs might be assigned,
which can lead to new drive letters for some cards.
No data can be accessed from the optical drive.
• Check whether the disc is inserted correctly.
• Is the optical drive displayed in Windows Explorer? If so,
test another disc.
The mouse does not work.
• Check the cable.
• Does your mouse work with other programs? Is your mouse
activated?
There is not enough room on the HDD.
• Audio and video recording require a lot of storage capacity
(up to 2.4 GB / hour). Back up unnecessary files of "My
Documents" onto CD-R's or move them to drive D:.
The PC does not start up.
• If all cable connections are correct, then try to reset the
power supply of the PC. Set the power switch at the rear of
the PC to position 0 (OFF). Now press down the main switch
at the front of the PC for 10 seconds. Wait 5 more seconds
and the restart the PC.
To Next Page
Loading...
