Mark V ProVis Injection System
15 - 20
MAXIMUM FLOW RATE IS 20
A Flow Rate above 20 was entered while in the 60 ml syringe system.
Press RESET, then enter a Flow Rate less than 20.
MAXIMUM FLOW RATE IS 50 ML/SEC
Injector is in the ML/SEC Flow scale, and a Flow Rate above 50 ml/
sec was entered. Press RESET, then enter a value no greater than 50
ml/sec.
MAXIMUM RISE/FALL IS 9.9 SECONDS
A Rise/Fall time greater than 9.9 seconds was entered. Press RESET,
then enter a value no greater than 9.9 seconds.
MAX PRESSURE IN ML/MIN/HR IS XXXX
A pressure limit was entered that is greater than the maximum
allowed in any given flow scale or syringe size. Enter a pressure limit
value no greater than the respective maximum.
MAX PRESSURE IN ML/SEC IS XXXX
A pressure limit which exceeds the maximum allowed in the selected
syringe system and flow scale. Enter a pressure limit no greater than
the respective maximum. (See acceptable pressure value ranges).
MAX PRESSURE IN ML/SEC IS 82
A pressure limit above 82 atü (atmospheres) was entered while using
the ml/sec Flow scale. This message appears when using 150 ml
syringes and the atü Pressure scale. Press RESET, then enter a value
no greater than 82 atü.
MAX PRESSURE IN ML/SEC IS 84
A pressure limit above 84 kg/sq cm was entered while using the ml/
sec Flow scale. This message appears when using 150 ml syringes
and the kg (kg/sq cm) Pressure scale. Press RESET, then enter a
value no greater than 84 kg/sq cm.
Minimum and Maximum Pressure Values
60 ml Syringe 150 and 200 ml Syringe
psi kg/cm
2
kPa atü psi kg/cm
2
kPa atü
100 7 689 6 100 7 689 6
ml / SEC 1100 77 7584 75 ml / SEC 1200* 84* 8274* 82*
100 7 689 6 100 7 689 6
ml / MIN / HR 700 49 4826 48 ml / MIN / HR 700 49 4826 48
* Values shown are for the 150 ml syringe
ml/SEC values for 200 ml syringe are: 1000 70 6895 68
To Next Page
Loading...
