119
Monitoring the output voltage of the drive.
Monitoring the output current of the drive.
Monitoring the percentage of the drive torque current relative to the motor rated current.
Monitoring the percentage of the flux current relative to the motor rated current.
Monitoring the percentage of the output torque of the drive relative to the motor rated torque.
Monitoring the percentage of the output power of the drive relative to the motor rated power.
Estimating the rotor frequency of the motor under the open loop vector condition.
The rotor frequency of the motor measured based on the encoder under the closed loop vector condition.
Monitoring the output power of the drive.
Monitoring the DC bus voltage of drive.
Fig. 6-2 Operation state of drive
Unit place of LED:
Operation state of drive 0~FFFFH (0)P01.17
DC bus voltage 0~800V (0V)P01.16
Low level of output (
Wh) 0~9999kwh (0)P01.15
High level of output (
Wh)
0~65535*10000kwh (0)P01.14
Measured frequency of moto
-600.00~600.00 (0.00)P01.13
Estimated frequency of moto
-600.00~600.00(0.00)P01.12
Motor powe
0~200.0%(0.0%)P01.11
Output torque -300.0~300.0%(0.0%)P01.10
Flux current
0~100.0%(0.0%)P01.09
Torque current
-300.0~300.0%(0.0%)P01.08
Output current 0.0~3Ie (0.0)P01.07
To Next Page
Loading...