Megmeet MV300 Series - Protection and Fault Parameters (Group P97)

206
UintTens
Thousands
Action upon contactor abnormality :
0 : Activate protection and coast to stop
1 : Alarm and keep running
Action upon communication fault :
0 : Activate protection and coast to stop
1 : Alarm and keep running
2 : Alarm and stop in the stop mode (only in
serial port control mode)
3 : Alarm and stop in the stop mode (in all
control modes)
Hundreds
Action upon EEPROM abnormality :
0 : Activate protection and coast to stop
1 : Alarm and keep running
Action upon 24V/±10V short circuit :
0 : Activate protection and coast to stop
1 : Alarm and keep running
Fig. 6-74 Fault protection and alarm property setting 1
Fig. 6-75 Fault protection and alarm property setting 2
Fault protection and alarm property setting 3 0~2113H (0000)P97.02
Fault protection and alarm property setting 2 0~2223H (0000)P97.01