Megmeet MV300 Series - Page 75

75
inductance
of motor 2
inductance of
motor 2
on model
P03.20
Rotator
resistance
of motor 2
Rotator
resistance or
of motor 2
0.000~65.000 0.001
Depending
on model
√ √ ×
P03.21
Mutual
inductance
of motor 2
Mutual
inductance of
motor 2
0.0~2000.0 0.1
Depending
on model
√ √ ×
P03.22
No-load
current (I0)
of motor 2
No-load
current (I0)
0.1~999.9A 0.1A
Depending
on model
√ √ ×
P03.23
Overload
protection
factor of
motor 2
Overload
protection
factor of
motor 2
20.0~110.0%
Set action level (%) = motor rated
current/ drive rated current × 100
Low speed compensation actual
action level = set action level ×
(output frequency/ 30HZ × 45 +
+55)
Actual converted current of
overload protection = sampling
current/overload protection action
level
0.1% 100.0% √ √ ×
P03.24
Parameter
auto-tuning
Parameter
auto-tuning
0: Disabled
1: Enabled (motor in static status)
2: Enabled (motor in rotate status)
3: Reserved (according to the
nameplate setting)
1 0 √ √ ×
P03.25
~ P03.28
Reserved
Group P05: Speed control parameters
P05.00
Speed loop
low-speed
proportional
gain
(ASR1-P)
Speed loop
low-speed
proportional
gain
0.1~200.0 0.1 20.0 √ √ ○
P05.01
Speed loop
low-speed
integral time
（ASR1-I）
Speed loop
low-speed
integral time
0.000~10.000S 0.001s 0.200s √ √ ○
P05.02
ASR1
output filter
ASR1 output
filter
0~8 (corresponds to 0~2^8/8ms) 1 0 × √ ○
P05.03
ASR
switching
frequency 1
ASR
switching
frequency 1
0.0％~50.0%
0.1
10.0％
× √ ○
P05.04
Speed loop
high-speed
proportional
Speed loop
high-speed
proportional
0.1~200.0 0.1 10.0 √ √ ○