Megmeet SPS-NE Series - Page 132

132
Function
code
Name
Index-
Sub-index
Value range
Min. unit
Default
value
Menu
mode
Cha
nge
Q
B
Bit1: Output current (A)
Bit2: Output frequency
(Hz)
LED tens:
Bit0: Operating speed
(R/MIN)
Bit1: Set speed (R/MIN
flashing)
Bit2: Operating line speed
(m/s)
Bit3: Set line speed (m/s
flashing)
LED hundreds:
Bit0: Output power
Bit1: Output torque (％)
Note: If all are zero, the
output frequency will be
displayed by default.
P16.01
LED display
parameter
selection 2
during running
2010-02h
Binary:
0: No display; 1: Display
LED ones:
Bit0: Output voltage (V)
LED tens:
Bit0: Analog closed-loop
feedback (%)
Bit1: Analog closed-loop
setting (% flashing)
Bit2: Terminal state (no
unit)
Bit3: Bus voltage
1
00
×
√
○
P16.02
LED parameter
2010-03h
Binary:
1
009H
×
√
○