2
Foreword
Thank you for choosing the SPS-NE series servo drive manufactured by Megmeet.
SPS-NE servo drive, developed on a new hardware platform and featured with excellent performance, fully-fledged
functions, compact structure, simple installation, easy commissioning and maintenance, is an ideal product with
favorable price-performance ratio in the servo drive market for both general purposes and OEM.
SPS-NE servo drive adopts Ethernet communication interface, supports EtherCAT communication protocol, and
realizes networked operation of single servo drive or multiple servo drives in cooperation with the host controller. It
can be applied in machine tool feed shafts, printing, textile, cutting, manipulators, punch presses, semiconductor
welding machines and so on, achieving fast and accurate control on position, speed and torque.
This manual provides instructions and precautions for wiring, parameter setting, fault diagnosis and troubleshooting.
In order to ensure the correct installation and operation of the SPS-NE series servo drive, and to unlock its full
potential, please read this manual carefully before installation, keep the manual properly and give it to the actual
user when necessary.
Unboxing inspection
When you unbox the product, remember to check the following:
whether there is any damage on the drive;
whether the rated values on the nameplate are the same as what you ordered;
whether the included wires are intact and can be connected for use.
Our company has implemented strict inspection on the product’s manufacturing and packaging. If there is still any
error, please contact us or the local distributor.
We are engaged in the continuous improvement of drives. The relevant manuals provided by us are subject to
change without notice.
To Next Page
Loading...
Need help?
General
