Install the product on the place that can bear the weight. Failure to comply will result in personal injuries or
equipment damage.
Do not install the drive near water pipes or other places with water splash. Otherwise, there will be equipment
damage.
Take care not to drop screws, gaskets, metal bars and the like into the drive. Otherwise, fire and equipment
damage may occur.
If the drive is damaged or lack of components, do not run the drive. Failure to comply will result in a fire or
personal injuries.
Do not install the product in the place exposed to direct sunlight. Otherwise, there will be equipment damage.
Cable lugs must be firmly connected to main circuit terminals. Otherwise, there will be equipment damage.
Do not install the servo drive in places with vibration beyond the specification. Otherwise, there will be
equipment damage.
To Next Page
Loading...