MELAG DAC Premium Plus - System and Network Integration

2 Installation requirements
9
System and network safety
The device is fitted with multiple external interfaces. Comply with the following information pertaining to the use of these
interfaces to ensure safe operation of the device, especially to ensure incorporation in the local network (LAN).
Interfaces and connections
NOTICE
Only connect the hardware to the device which is listed in the following table. Only use the software
which has been intended for the purpose and approved by the manufacturer.
Interface Type Hardware Purpose/software
CF card slot CF type I CF card up to 4GB with an FAT16 or
FAT32 file system
Writing log data on a CF card
CF card up to 4GB with a FAT16 file
system
Device software update
Ethernet Ethernet
IEEE 802.3
Switch port
(via CAT-5 patch cable)
MELAview Service
saving log data, querying device data
MELAtrace
saving log data
FTP server
saving log data
MELAconnect (mobile app)
querying device data
Connection to the local network (LAN)
MELAprint60
(via CAT-5 patch cable)
Label printing
MELAprint42/44
(via CAT-5 patch cable with network
adapter)
Log printing
NOTICE
When performing a device software update, use only the update data authorised by MELAG for the
corresponding device type.
Operating the device with memory media
To prevent data loss, only use memory media to save the log data with the following characteristics:
n functional (without malware, etc.)
n writeable
n formatted with a correct file system
Perform regular data backup. Restrict access to the device and systems with access authorisation to the necessary circle
of persons.
Only use CF cards.