10 Settings
53
Changing the Admin PIN
PLEASE NOTE
If you forget the Admin PIN, consult your stockist/MELAG customer services provider.
The Admin PIN (standard: 1000) can be edited like every other User PIN and should be changed after de-
livery.
User authentication for sterilization
The user authentication can be set to ensure exact logging and verification. User authentication is per-
formed by entry of the user PIN. The following settings are possible:
▪ Query user authentication upon program start
▪ Query user authentication upon program end
▪ Query user authentication upon program start and end
▪ You can skip the query user authentication
Determining options for the user authentication
1. Select menu Settings > User administration.
2. User administration menu and perform settings,
LOGIN. In order to access the User
administration menu and perform settings, enter
the admin PIN (standard: 1000) and confirm with
LOGIN. The display switches to window User
administration.
3. Set a checkmark next to Program start with
user PIN to perform user authentication upon every
program start. The program will start only after entry
of the user PIN.
To Next Page
Loading...
