FOCKE MELER GLUING SOLUTIONS TABLE OF CONTENTS
Other factors 3-2
Unpacking 3-3
Contents 3-3
Mounting the equipment 3-3
Electrical power supply connection 3-3
Pneumatic connection 3-4
Hose and applicator connection 3-4
Programming parameters 3-5
Programming working temperatures 3-5
Selecting the overheating value 3-5
Keeping a component on display 3-6
External I/O connections 3-6
Temperature ok 3-7
External standby 3-7
Starting up the motor (ok ext) 3-8
Motor speed set point reference (ref ext) 3-9
Failures output in pump control card 3-9
4. MELTER OPERATION 4-1
General information 4-1
Loading the adhesive into the cylindrical hopper 4-2
Starting up the melter 4-3
Melter displays 4-4
Temperature display for each component 4-5
Alarm display 4-5
Display and adjustment of the cylinder working temperature 4-6
Temperature adjustment 4-6
Programming the melter parameters 4-7
Setting the clock 4-8
Setting the current day and time 4-8
Programming equipment activation/deactivation 4-9
To Next Page
Loading...
