MA-5081-E B4 NS ADHESIVE MELTER MANUALTABLE OF CONTENTS
Disabling the equipment activation/deactivation program 4-10
Programming the activation/deactivation of the equipment’s standby function 4-10
Disabling the equipment standby function program 4-11
Special function buttons 4-12
Pump start-up 4-13
Pumping control 4-13
Starting up the pump control card 4-13
Pumping safety measures 4-14
Password security 4-14
LED indicators 4-15
Modes of operation 4-16
Mode of operation with internal pumping control and internal speed control 4-16
Mode of operation with internal pumping control and external speed control 4-17
Mode of operation with external pumping control and internal speed control 4-18
Mode of operation with external pumping control and external speed control 4-19
User configuration menu 4-21
Displaying alarms and reset function 4-21
Maximum rpm alarm 4-21
Minimum rpm alarm 4-22
Variator alarm 4-22
Configuring speed ramp 4-22
Programming speed ramp 4-23
Current Vin voltage display 4-24
Regulating the bypass valve 4-24
Adjusting the manual valve 4-25
Pneumatic valve control 4-25
Turning off the melter 4-25
5. MAINTENANCE 5-1
External cleaning 5-1
System depressurisation 5-2
To Next Page
Loading...
