FOCKE MELER GLUING SOLUTIONS TABLE OF CONTENTS
Cleaning the tank 5-3
Changing adhesive type 5-3
Cleaning burnt adhesive 5-3
Emptying the tank 5-4
Cleaning the tank with cleaning pellets 5-4
Filter maintenance 5-5
Pump maintenance 5-6
Leakage inspection 5-6
Gear motor maintenance 5-6
Cleaning the motor fan 5-6
Checking the lubricant 5-6
Recommended lubricant 5-7
Safety Thermostat 5-7
Removing the equipment from its base 5-7
6. TECHNICAL CHARACTERISTICS 6-1
General 6-1
Dimensions 6-2
Melting unit 6-2
Base plate 6-2
Accessories 6-2
Level control system 6-2
7. ELECTRICAL DRAWINGS 7-1
8. PNEUMATIC DRAWINGS 8-1
Components list 8-1
Pneumatic cylinder control system 8-1
Pneumatic by-pass valve control system (optional) 8-2
9. SPARE PART LIST 9-1
A. TANK GROUP 9-3
To Next Page
Loading...
