Melitta Caffeo Barista T - Basic Operation; Switching the Appliance on and of

Basic operation
61
ENGLISH
Requirement: The appliance has been positioned and connected.
1. Place a vessel beneath the outlet.
2. Switch the appliance on with the ON/OFF button.
» The welcome display appears on the display.
» The request to carry out set-up appears on the display: Please set up
the machine.
» The "menu/ok" button ashes.
3. Conrm with "menu/ok".
» The Language menu appears.
4. Select your language with the arrow buttons. Conrm with
"menu/ok".
» The Clock menu appears.
5. Select the hour and minutes with the arrow buttons. Conrm each set-
ting with "menu/ok".
» The Water hardness menu appears.
6. Select the determined water hardness range with the arrow buttons or
conrm the default value with "menu/ok".
» The request Please rell and insert water tank appears.
7. Remove the water tank. Rinse the water tank out with clean water. Fill
the water tank with fresh water and insert it.
» The appliance heats up and performs automatic rinsing.
» The ready symbol and the request Fill beans appear in the display
8. Fill coee beans into the bean container. To do this, read chapter Filling
with coee beans and using BeanSelect on page65.
4 Basic operation
This chapter describes basic operating steps for using the appliance on a
daily basis.
4.1 Switching the appliance on and o
Before switching on when initially starting up the appliance, read chap-
ter 3.5 Switching the appliance on for the rst time on page60.
Information
 The appliance performs automatic rinsing when switching on and o.
 During rinsing, rinsing water is also conducted into the drip tray.