Melitta Caffeo Barista T - Stopping Beverage Preparation; Preparing Two Beverages Simultaneously

Preparing beverages
74
ENGLISH
 Before selecting a beverage, use the "Beverage amount" slider to set a
beverage amount.
 Before selecting a beverage, use the "Coee strength" slider to set the
coee strength.
 Set the coee avour with the arrow buttons.
Information
 When preparing latte macchiato and cappuccino, the total beverage
amount is subdivided into a coee and a milk amount according to a
specied ratio.
 If you do not prepare a beverage within 1 minute, the appliance switches
to the default settings.
Changing beverage settings during preparation
You can change the beverage amount and the coee strength during bev-
erage preparation.
 During beverage dispensing (coee or milk), use the "Beverage amount"
slider to set the relevant beverage amount.
 During the grinding process, use the "Coee strength" slider to set the
coee strength.
5.7 Stopping beverage preparation
If you want to stop beverage preparation prematurely, press the selected
direct key again.
5.8 Preparing two beverages simultaneously
The "2 cups" button is used to prepare two beverages simultaneously.
Two-cup dispensing is possible for espresso, cappuccino, café crème and
latte macchiato. Two-cup dispensing is not possible for any other type of
beverage.