Melitta Caffeo Barista T - Preparing Hot Water; Changing Beverage Settings before and During Preparation

Preparing beverages
73
ENGLISH
4. You can execute the Easy Cleaning programme or prepare further bev-
erages.
a) Execute the Easy Cleaning programme. Follow the instructions on the
display. Information on this is available in chapter 9.4 "Easy Cleaning"
programme on page87.
b) Prepare further beverages.
» The ready symbol appears on the display.
5.5 Preparing hot water
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "Hot water" button.
» Hot water dispensing begins.
» Beverage dispensing is ended automatically.
3. Remove the vessel.
» The ready symbol appears on the display.
5.6 Changing beverage settings before and during
preparation
You can change beverage settings before and during beverage preparation.
Information
These settings only apply to current beverage preparation.
Changing beverage settings before preparation
The bean type, the total beverage quantity, the coee strength and the
coee avour can be changed before selecting a beverage.
Information
The coee avour is set with the intenseAroma-function. STANDARD and
INTENSE are available for selection. In the INTENSE setting, the brewing time
is longer and the coee has a more intense avour.
 Before selecting a beverage, select a bean type with the "BEANSELECT"
slider (3).
STANDARD
INTENSE