Melitta Caffeo Barista T - Changing Default Settings

Permanently changing beverage settings
76
ENGLISH
Recipe selection is similar for all beverages. The selection of a ristretto is
described as an example here.
Direct keys
Espresso
Recipes
Exit
Espresso
Ristretto
Lungo
Double Espresso
Double Ristretto
Fig. 16: Recipe selection for ristretto
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Direct keys > Espresso > Recipes menu.
3. Use the arrow buttons to select Ristretto and conrm with
"menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
» When an espresso is next prepared, the ristretto recipe will be used.
6.2 Changing default settings
You can change the following default settings depending on beverage:
 Coee amount: in millilitres,
 Froth amount: in millilitres,
 Milk amount: in millilitres,
 Hot water amount: in millilitres,
 Coee strength: very mild, mild, normal, strong, very strong,
 Coee avour: Standard, Intense.
Information
The default settings remain valid until they are changed again.
Changing the beverage settings is similar for all beverages. Changing the
coee strength for an espresso is described here as an example.