Melitta Caffeo Barista T - Setting the Water Hardness; Using a Water Ilter

Care and maintenance
91
ENGLISH
9.8 Setting the water hardness
The set water hardness inuences the frequency of descaling. The harder
the water, the more frequently the appliance has to be descaled.
Information
The water hardness cannot be set if you use a water lter (see chapter 9.9
Using a water lter on page91).
Determine the water hardness with the enclosed test strip. Observe the
instructions on the test strip packaging and in table Water hardness range
on page95.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Water hardness menu using the arrow buttons
3. Use the arrow buttons to select the water hardness range and conrm
with "menu/ok".
4. Exit the menu with the command Exit.
» The ready symbol appears on the display.
9.9 Using a water lter
Use of a water lter extends the service life of the appliance and the appli-
ance has to be descaled less frequently. The water lter contained in the
scope of delivery lters calcium and other pollutants out of the water.
1
42
43
44
Fig. 24: Screwing/unscrewing the water lter
The water lter (43) is screwed into and unscrewed from the thread (44)
on the base of the water tank (1) using the screwing aid at the end of the
enclosed coee spoon (42).