Melitta CAFFEO CI - Connection; Switching On For The First Time

12
4.2 Connection
• Plug the power cable into an appropriate power socket.
Warning!
Danger of re and electric shock due to incorrect supply voltage,
incorrect or damaged connections and power cable.
– Ensurethatthesupplyvoltagecorrespondstothesupplyvoltagespecied
ontheidenticationlabeloftheappliance.Theidenticationlabelisonthe
right side of the appliance behind the cover (Fig. B, No. 13).
– Ensure that the power socket meets the applicable standards for electrical
safety.Ifindoubt,contactaqualiedelectrician.
– Never use damaged power cables (damaged insulation, bare wires).
– During the guarantee period, only have the damaged power cable
replaced by the manufacturer; after the guarantee period only have it
replacedbyqualiedspecialists.
4.3 Switching on for the rst time
Note
When switching on the Melitta
®
CAFFEO
®
CI
®
forthersttime,onlydoso
withoutthewaterlter.
• PresstheON /OFFbutton (Fig. A, No. 5), to switch the appliance
on.
→ The rotary switch is illuminated. The prompt to select a language appears
on the graphic display.
• Turn the rotary switch to select the desired language and press it to
save the selected language.
→ The prompt to set the time will appear on the graphic display.
• Turn the rotary switch to select the desired hour and press it to save the
selected hour.
• Turn the rotary switch to select the desired minutes and press it to save
the selected minutes.
→ Theprompttollthebeancontainerwillappearonthegraphicdisplay.
Heft_CI_Export_2_1.indd 12 26.11.2013 14:00:23