Melitta CAFFEO CI - Removing The Water Filter

44
10.3 Removing the water lter
• Lift the lid of the water tank (Fig. A, No. 6) and pull the water tank up
and out of the appliance.
•
Unscrewthewaterlterfromthethreadonthebaseofthewaterlter.
• Reinsert the water tank.
• Select the Remove lter menu option from the sub-menu.
• Turn the rotary switch until Start
ishighlightedandpressittoconrm
the selection.
→ The prompt Filter has been removed, set water hardness is shown.
• Press the rotary switch.
• Turn the rotary switch until the water hardness level you require is
highlighted, e.g. Very hard, and press it to save the selection.
→ The appliance returns to the main menu.
Note
The Melitta
®
Claris
®
waterltershouldnotremaindryoveranextendedperiod
of time. We therefore recommend storing the Melitta
®
Claris
®
waterlterin
a glass of water in the refrigerator if the appliance will not be used for an
extended period.
Heft_CI_Export_2_1.indd 44 26.11.2013 14:00:29