16
6.2 Preparing a cappuccino
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 14).
• Place a suitable vessel under the outlet.
• Push the outlet downwards as far as it will go.
• Depending on the model, connect the tube with the outlet and
the supplied Melitta
®
CAFFEO
®
CI
®
milk container (Fig. C) or use
conventional milk cartons.
• Press the button for coffee strength
to adjust the coffee strength.
• Press the button for cappuccino .
→ The grinding process and coffee dispensing start
now. Dispensing ends automatically when the set
dispensed quantity is reached.
→ The bean symbols indicate the coffee strength. The
dispensed quantity is displayed in millilitres.
• Turn the rotary switch to adjust the dispensed
quantity while the coffee is being dispensed.
→ To stop dispensing coffee before the programmed amount is reached, press
the rotary switch. The appliance will then continue with dispensing the milk.
The appliance warms up for milk dispensing.
→ Milk dispensing will start. Dispensing ends automatically when the set milk
quantity is reached.
• To completely cancel coffee and milk dispensing, press the button for
cappuccino .
• Turn the rotary switch to adjust the milk quantity while the milk is being
dispensed, if required.
• To stop dispensing milk before the programmed amount is reached,
press the rotary switch.
• Carry out the Easy Cleaning programme, if necessary. The appliance
will prompt you to do this automatically (see page 34) OR select
another beverage.
Cappuccino
110 ml 060 ml
Heft_CI_Export_2_1.indd 16 26.11.2013 14:00:23
To Next Page
Loading...
