Melitta CAFFEO CI - Integrated Descaling Programme

39
ENGLISH
9.7 Integrated descaling programme
The integrated descaling programme removes lime residues from the interior of the
appliance. It takes a total of approximately 25 minutes. You can check the progress
of the programme at any time on the progress bar on the graphic display.
Caution!
– Run the integrated descaling programme every 3 months; at the latest,
however, when a prompt appears on the graphic display.
– Only use the Melitta
®
ANTI CALC Espresso Machines descaling agent.
ThesedescalingagentsarespecicallydesignedfortheMelitta
®
CAFFEO
®
CI
®
.
– Never use vinegar or other descaling agents.
Run the integrated descaling programme as follows:
1 Select the Care sub-menu.
2
Turn the rotary switch until Descaling is
highlightedandpressittoconrmtheselection.
3 Turn the rotary switch until Start is highlighted
and press it to start the programme.
→ The prompt Empty container and tray will appear
on the graphic display.
4 Empty the drip tray and the coffee grounds
container and then reinsert them.
→ The prompt Remove water tank will appear on the
graphic display.
5 Lift the lid of the water tank (Fig. A, No. 6) and
pull the water tank up and out of the appliance
and then empty it completely.
6
If you are using a water lter, remove it from
the water tank.
Care
Descaling
Cleaning
Filter
Descaling
Start
Exit
Empty
container
and tray
Descaling
Remove
water tank
Descaling
Heft_CI_Export_2_1.indd 39 26.11.2013 14:00:28