38
8 Place a vessel with a capacity of about 0.7 l or
the coffee grounds container under the outlet and
press the rotary switch to continue.
→ First, two rinsing processes will be carried out. The
prompt Insert cleaning tab into ground coffee chute
will then appear on the graphic display.
9 Open the lid of the ground coffee chute, throw
in a cleaning tab (Fig. I) and close the lid of the
ground coffee chute.
→ The integrated cleaning programme is continued.
This stage takes approximately 5 minutes. Water
owsoutoftheoutletaswellasintheinteriorof
the appliance into the drip tray. The prompt Empty
container and tray then appears on the graphic
display.
10 Empty the vessel under the outlet.
11 Empty the drip tray and the coffee grounds
container and then reinsert them and replace the
vessel under the outlet.
→ The integrated cleaning programme is continued.
This stage takes approximately 5 minutes. Water
owsoutoftheoutletaswellasintheinteriorof
the appliance into the drip tray. The prompt Empty
container and tray then appears on the graphic
display.
12 Empty the vessel under the outlet, the drip tray
and the coffee grounds container and then
reinsert them.
→ Theintegratedcleaningprogrammeisnished.Theapplianceisreadyfor
operation.
Insert cleaning
tab into ground
coffee chute
Cleaning
Empty
container
and tray
Cleaning
Empty
container
and tray
Cleaning
Heft_CI_Export_2_1.indd 38 26.11.2013 14:00:28