Melitta CAFFEO CI - Filling the Water Tank; 5 Switching on and off; Switching on the Appliance; Switching off the Appliance

14
Note
When the tilt lever is vertical during the brewing process, no beans fall into the
grinder.
4.5 Filling the water tank
• Lift the lid of the water tank (Fig. A, No. 6) and pull the water tank up
and out of the appliance.
• Fill the water tank to the max. mark with fresh tap water and reinsert it.
5 Switching on and off
Forswitchingonwhenstartinguptheapplianceforthersttime:seepage12.
5.1 Switching on the appliance
• PlaceavesselundertheoutletandpresstheON/OFFswitch .
→ The rotary switch is illuminated. A greeting text appears on the graphic
display. The appliance heats up, performs an automatic rinse and hot
waterowsoutoftheoutlet.Thebuttonsandtherotaryswitcharethen
illuminated. The appliance is ready for operation.
5.2 Switching off the appliance
• PlaceavesselundertheoutletandpresstheON/OFFswitch .
→ Theapplianceperformsanautomaticrinseandhotwaterowsoutofthe
outlet. The appliance then switches off.
• In the menu, you can adjust different settings for the energy-saving
mode and the automatic switch-off function (see page 22).
Heft_CI_Export_2_1.indd 14 26.11.2013 14:00:23