17
ENGLISH
6.3 Preparing a latte macchiato
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 14).
• Place a suitable vessel under the outlet.
• Push the outlet downwards as far as it will go.
• Depending on the model, connect the tube with the outlet and
the supplied Melitta
®
CAFFEO
®
CI
®
milk container (Fig. C) or use
conventional milk cartons.
• Press the button for coffee strength
to adjust the coffee strength.
• Press the button for latte macchiato .
→ The appliance warms up for milk dispensing.
→ Milk dispensing will start. Dispensing ends automatically when the set milk
quantity is reached.
• Turn the rotary switch to set the milk quantity while the milk is being
dispensed, if required.
• To stop dispensing milk before the programmed amount is reached,
press the rotary switch. The appliance will then immediately start
dispensing the coffee.
→ The grinding process and coffee dispensing start now. Dispensing stops
automatically when the set dispensed quantity is reached.
• To completely cancel coffee and milk dispensing, press the button for
latte macchiato
.
• Turn the rotary switch to adjust the dispensed
quantity while the coffee is being dispensed, if
required.
→ The bean symbols indicate the coffee strength. The
dispensed quantity is displayed in millilitres.
• To stop dispensing coffee before the programmed
amount is reached, press the rotary switch.
Latte Macchiato
110 ml 060 ml
Heft_CI_Export_2_1.indd 17 26.11.2013 14:00:23
To Next Page
Loading...
