Melitta CAFFEO CI User Manual

18
• Carry out the Easy Cleaning programme, if necessary. The appliance
will prompt you to do this automatically (see page 34) OR select
another beverage.
6.4 Preparing milk froth or warm milk
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 14).
• Place a suitable vessel under the outlet.
• Depending on the model, connect the tube with the outlet and
the supplied Melitta
®
CAFFEO
®
CI
®
milk container (Fig. C) or use
conventional milk cartons.
• Press the button for milk froth
. Press briey for milk froth and
press and hold for hot milk (note graphic display).
→ The appliance warms up for milk or milk froth dispensing.
→ Milk or milk froth dispensing will start. Dispensing ends automatically when
the set milk or milk froth quantity is reached.
• Turn the rotary switch to adjust the milk or milk froth quantity while the
milk or milk froth is being dispensed, if required.
• To stop dispensing milk or milk froth before the programmed amount is
reached, press the button for milk froth
or the rotary switch.
• Carry out the Easy Cleaning programme, if necessary. The appliance
will prompt you to do this automatically (see page 34) OR select
another beverage.
Heft_CI_Export_2_1.indd 18 26.11.2013 14:00:24

Melitta CAFFEO CI Specifications

General

Type	Espresso
Product type	Espresso machine
Capacity in cups	2 cups
Water tank capacity	1.8 L
Coffee beans capacity	260 g
Product color	White
Removable water tank	Yes
Multi beverage	No