Melitta CAFFEO CI - Cleaning the Milk Unit (Intensive Cleaning Programme)

35
ENGLISH
9.5 Cleaning the milk unit
("Intensive Cleaning" programme)
With the “Intensive Cleaning” programme, the milk unit is cleaned thoroughly with a
cleaning agent.
Caution!
Only use the Melitta
®
milk system cleaning agent for fully automatic coffee
makers. This cleaning agent is specially designed for the Melitta
®
CAFFEO
®
CI
®
. The use of other cleaning agents can damage the appliance.
• If necessary, clean the milk tube and the milk
outlet opening with the enclosed cleaning brush.
•
Place a vessel with at least 0.5 l capacity under
the outlet (e.g. the coffee grounds container).
• Select the Care sub-menu.
• Turn the rotary switch until Intensive Cleaning is
highlightedandpressittoconrmtheselection.
• Turn the rotary switch until Start is highlighted
and press it to start the programme.
• Fill the milk container with 50 ml of milk system
cleaning agent and then add 450 ml of warm tap
water.
• Depending on the model, connect the tube to the milk container or
the alternatively used container and to the outlet, and press the rotary
switchtoconrm.
→ The “Intensive Cleaning” programme will start. This will release steam from
themachineandhotcleaningliquidwillowoutoftheoutlet.
→ Subsequently, the programme interrupts automatically and prompts you to
rinse the milk container.
• Depending on the model, thoroughly rinse the milk container or the
alternativelyusedcontainerandthenllitwith0.5loffreshtapwater.
• Presstherotaryswitchtoconrm.
• Depending on the model, connect the tube to the milk container or the
alternatively used container and to the outlet.
Care
Intensive Cleaning
Easy Cleaning
Cleaning
Intensive Cleaning
Start
Exit
Heft_CI_Export_2_1.indd 35 26.11.2013 14:00:27