48
Notes
Keep the packaging material, including the hard foam element, on hand
for transport and possible return shipments, to avoid transport dama-
ge.
It is normal to find traces of coffee and water in the machine before it is
started up for the first time. This is because the appliance was tested for
faultless function in the factory.
Connecting
Plug the power-supply cord into a 10A earthing contact socket outlet.
Warning!
Danger of fire and danger of electric shock due to incorrect supply
voltage, incorrect or damaged connections and power cord.
Ensure that the supply voltage agrees with the supply voltage specified
on the type plate of the appliance. The type plate is on the right side of
the appliance behind the cover (Fig. B, no. 18).
Ensure that the power outlet satisfies the applicable standards for elec-
trical safety. If in doubt contact a specialized electrical company.
Never use damaged power cords (damaged insulation, bare wires).
During the guarantee period only have the damaged power-supply cord
replaced by the manufacturer; after the guarantee period only have it
replaced by qualified specialists.
Filling the bean container
Thanks to the 2-chamber "Bean Select" bean container you can use two different
types of coffee in parallel. For example, fill one chamber with espresso beans, and
the other with café crème beans. Then you can conveniently change between the two
types via the rocker lever.
Remove the lid of the bean container and fill the container with fresh
coffee beans. Each of the two chambers can be filled with a maximum of
135 g of coffee beans.
–
–
•
–
–
–
–
•
To Next Page
Loading...
Need help?
General
