ENGLISH
61
Display Time
1 hour
2 hours
4 hours
8 hours
Press the on/off button to confirm the selected time.
Depending on the selection 1 to 4 bean symbols will be flashing as confir-
mation. The appliance is in stand-by mode again.
Adjusting the brewing temperature – function setting 4
Adjust the brewing temperature as follows to meet your requirements:
The brewing temperature is factory-set to level 2 (medium).
Prerequisite: The appliance must be in stand-by mode.
The on/off button
will be illuminated red.
Simultaneously press the button for single-cup dispensing and the but-
ton for steam dispensing
, until the four buttons are faintly illuminated.
Press the button for single-cup dispensing
, to switch between three
possible brewing temperatures.
The button for single-cup dispensing is brightly illuminated.
Your selection is indicated via the bean symbols in the display.
Display Brewing temperature
low
medium
high
•
→
→
•
•
→
→
To Next Page
Loading...
Need help?
General
