56
7 Preparing hot water
Prerequisite: The appliance must be ready for operation.
Place a cloth under the Perfect Cappuccino to catch any residual water that
may escape.
Pull the whisk of the Perfect Cappuccino downward and off of the steam
pipe (Fig. F).
Place a vessel under the steam pipe and slide the steam pipe downward
until it is below the edge of the vessel.
Turn the valve switch (Fig.
A, no. 6) clockwise to open the valve.
The symbol for the valve is flashing. Hot water flows out of the steam
pipe and into the vessel.
When the desired quantity of water is reached, turn the valve switch an-
ticlockwise to close the valve.
Wait until the steam pipe has cooled off and then slide the whisk onto the
steam pipe from below until it locks in place.
•
•
•
•
→
•
•
To Next Page
Loading...
Need help?
General
