ENGLISH
59
Water hardness
range
Properties °dH °f
soft 0 - 7,2 °dH 0 - 13 °f
medium 7,2 - 14 °dH 13 - 25 °f
hard 14 - 21,2 °dH 25 - 38 °f
very hard > 21,2 °dH > 38 °f
Press the on/off button to confirm the selected water hardness cate-
gory.
Depending on the selection 1 to 4 bean symbols will be flashing in the
display. The appliance is in stand-by mode again.
Setting the timer for energy-saving stand-by mode
– function setting 2
Additional information on energy-saving stand-by mode is provided on page 58.
The timer is factory-set to level 2 (15 minutes).
Please adjust the timer as follows:
Prerequisite: The appliance must be in stand-by mode.
The on/off button
will be illuminated red.
Simultaneously press the button for single-cup dispensing and the but-
ton for steam dispensing
, until the four buttons are faintly illuminated.
Press the button several times for brewing strength
to select from four
possible times for the timer.
The button for brewing strength is brightly illuminated.
Your selection is indicated by the bean symbols in the display.
•
→
→
•
•
→
→
To Next Page
Loading...
Need help?
General
