Melitta Caffeo User Manual

66
The symbol for the water reservoir is illuminated.
7 Fill the water reservoir to the Max. mark and re-insert it.
The button for steam dispensing is illuminated.
8 Press the button for steam dispensing .
The integrated cleaning programme will start. This process lasts approximate-
ly 10 minutes. Subsequently, the button for steam dispensing will be illumina-
ted .
9 Empty the coffee grounds container and return it to its position under the
outlet.
10 Press the button for steam dispensing
.
The integrated cleaning programme will continue. This process lasts approxi-
mately 5 minutes. Water flows inside the appliance into the drip tray. Subse-
quently, the symbol for the drip tray will be illuminated .
11 Empty the drip tray and the coffee grounds container.
12 Reinsert the drip tray with the coffee grounds container.
The on/off button will be illuminated after a brief heat-up phase. The
buttons and the bean symbols are illuminated. The appliance is ready for
operation.
Note
If the symbol for the valve is illuminated during the cleaning process:
Place a bowl under the Perfect Cappuccino and turn the valve switch
(Fig, A, no. 6) clockwise to open the valve.
The symbol for the valve
is flashing.
As soon as the symbol for the valve is continuously illuminated, turn
the valve switch counter-clockwise to close the valve.
The integrated cleaning programme will continue.
→
→
→
→
→
–
–
–
–

Melitta Caffeo Specifications

General

Pump Pressure	15 bar
Milk Frother	Yes
Programmable	Yes
Water Tank Capacity	1.8 L
Color	Silver/Black