ConnectX®-3 Ethernet Single and Dual QSFP+ Port Adapter Card User Manual Rev 2.0
Mellanox Technologies
7
Revision History
This document was printed on June 27, 2013.
Table 1 - Revision History Table
Date Rev Comments/Changes
June 2013 2.0 Updated User Manual structure
February 2013 1.8
• Added Section 4.3, “VMware Driver,” on page 39
• Updated Figure 7, “PCI Device,” on page 20 and Figure 8,
“Device Manager,” on page 58
• Updated all Web links in the User Manua
- lFigure 10, “Mechanical Drawing of the Dual-
port MCX314A-BCBT Adapter Card,” on
page 50
November 2012 1.77
- Updated Web links in the following locations:
- Section 6.5.1, “Software Requirements,” on page 59
- Table 7, “MCX313A-BCBT Specifications Table,” on page 46
• Table 8, “MCX314A-BCBT Specification
s Table,” on page 47
October 2012 1.6
•Fixed Table 5, “Jumper Configuration,” on page 17
• Updated figures in Section 4.2, “Windows Driver,” on page 23
by providing ConnectX-3 examples
August 2012 1.5
• Added operational and non-operational temperature and humid-
ity level to the following tables:
- Table 7, “MCX313A-BCBT Specifications T
able,” on page 46
- Table 8, “MCX314A-BCBT Specifications Table,” on page 47
May 2012 1.4
• Removed “Blinking indicates a problem with the physical link”
from Table 9, “Physical and Logical Link Indication,” on
page 48
April 2012 1.3
• Updated power numbers in Table 7, “MCX313A-BCBT Specifi-
cations Table,” on page 46 and Table 8, “MCX314A-BCBT
Specifications Table,” on page 47
January 2012 1.2
• Minor edits
• Updated LED functions in Section 2.3, “I2C-compatible Inter-
face,” on page 14
• Formatted specification tables in Appendix 7, “Specifications,”
on page 46
October 2011 1.1 Added new OPNs based on ConnectX-3 Step A1 devices
July 2011 1.0 Minor edits
July 2011 0.10 First Release
To Next Page
Loading...
Need help?
General
