11
CONNECTION (CONTINUED)
CONNECTING THE PLAYER TO A TV USING THE HDMI OUTPUT JACK
NOTES:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component or
Video OUT jack on the player.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
•
When using HDMI as your source, setup the HD resolution in the Video menu as described on page 21 and the Digital Output in
the Audio menu as described on page 22.
• When you connect the HDMI cable to a TV for the first time, the HDMI output resolution will be automatically set to the highest
provided by the TV.
• If connecting to a Receiver and TV that have an HDMI jack, please see the next page.
• Depending on your TV, some HDMI resolutions may not work.
To Next Page
Loading...
Need help?
Power
Operating Environment
Weight and Dimensions
