What to do if my Memorex MVBD2520 Blu-ray Player has no picture?
If your Memorex Blu-ray Player shows no picture, ensure all equipment is properly connected according to the manual's instructions and that the video cables are securely connected. Verify that your TV is powered on and set to the correct input mode (usually VIDEO or AV) to receive the Blu-ray player's signal.
What to do if my Memorex MVBD2520 Blu-ray Player does not start playback?
If your Memorex Blu-ray Player won't start playback, ensure that a disc is inserted correctly (label side up) and that it is a playable disc. Make sure the disc is placed correctly on the disc tray inside the guide. If the disc is dirty, clean it.
Why is my Memorex MVBD2520 Blu-ray Player remote not working?
If the Memorex Blu-ray Player remote isn't working, first, replace the batteries with fresh ones, ensuring they are installed correctly according to the diagram. Then, aim the remote directly at the sensor on the Blu-ray player. Make sure you are within 20 feet of the unit and that there are no obstacles blocking the path of the beam. Also, try reducing the amount of light in the room.
Why is there no sound coming from my Memorex MVBD2520?
If there is no sound from your Memorex Blu-ray Player, first, ensure that all equipment is properly connected according to the instructions in this manual and that the audio cables are securely connected. Check that your audio receiver is powered on and set to the appropriate audio input mode to receive the Blu-ray player's signal.
How to fix a Memorex MVBD2520 that has no power?
If your Memorex Blu-ray Player has no power, make sure the AC cord is plugged into an AC outlet.
Why is my Memorex Blu-ray Player not functioning properly?
If your Memorex Blu-ray Player powers on but isn't functioning correctly, unplug the unit and wait one to two hours to allow it to dry if condensation has formed. Ensure you're using a compatible disc. Reset the unit by pressing the POWER/STANDBY button, then unplug the power cord for one minute before plugging it back in. Also, clean the disc and insert it with the label side up. Note that some features may not be available on all discs; try another function.
How to improve poor playback picture on Memorex MVBD2520 Blu-ray Player?
If the playback picture on your Memorex Blu-ray Player is poor, the disc may be dirty. Clean the disc.
Why are subtitles not working on my Memorex MVBD2520?
If subtitles are not working properly on your Memorex Blu-ray Player, remember that subtitles appear only when the discs contain them. Also, check if subtitles are turned on.
How to fix the picture fitting issue on my Memorex Blu-ray Player?
If the picture is not fitting properly on your Memorex Blu-ray Player, select the correct TV type (PS, LB, WIDE) in the Setup menu to match your TV.
How to stop playback picture from rolling on Memorex MVBD2520?
If the playback picture rolls on your Memorex Blu-ray Player, the unit may need to be reset to NTSC. Set the unit to NTSC.
Recommendations for using surge protectors for AC connection to protect against lightning.
Warning about the laser system and the need for qualified service personnel to prevent eye injury.
Information regarding compliance with FCC rules for digital devices and potential interference with radio communications.
Cautionary notes for maintaining FCC compliance, including using shielded cables for connections.
Digital interface for high-definition video and multi-channel audio without degradation.
Identification and description of controls located on the front panel of the player.
Identification and description of connections and ports located on the rear panel of the player.
Details the buttons and functions of the remote control for operating the player.
Guide for connecting the player to a TV via HDMI for high-definition audio and video.
Setup options for general player settings, including restore settings.
Menu for configuring video playback settings.
Configuration options for HDMI output, including resolution and color settings.
Menu for configuring audio playback settings.
Menu for setting audio, subtitle, and menu languages.
Settings for parental controls and content rating restrictions.
Configuration of parental control levels for DVD playback based on ratings.
Configuration of parental control levels for Blu-ray playback based on age restrictions.
Process to set or change the parental control password.
Menu for configuring network connectivity and settings.
Step-by-step guide to play Blu-ray discs and standard DVDs.
Step-by-step guide to play audio CDs on the player.
Guide for playing back data files from discs, USB drives, or SD cards.
Instructions for updating the player's firmware via CD or DVD.
Troubleshooting common issues like no power, no picture, or no sound.
Solutions for picture problems, rolling video, and remote control malfunctions.
Solution for accessing dimmed setup menus, often due to disc presence.
Troubleshooting issues related to disc playback, function availability, and language settings.
Solutions for errors encountered during BD-Live downloads or storage.
Guidelines for handling, cleaning, and storing discs to prevent damage.
Power| power requirements | AC120V, 60Hz |
|---|---|
| power consumption | <25W |
| standby power consumption | 1W |
Operating Environment| operating temperature | 5°C to 35°C |
|---|---|
| operating humidity range | 10% to 75% |
Video and Audio Formats| format disc support | BD (405nm), DVD (650nm), CD (780nm) |
|---|---|
| video format | AVC (H.264), VC-1, MPEG-2 |
| audio format | DTS, DTS-HD, Dolby Digital, Dolby Digital Plus, Dolby True HD, Linear PCM |
Video Output| composite video output | 1.0 Vp-p |
|---|---|
| component video output Y | 1.0Vp-p |
| component video output Pr/Pb | 0.70Vp-p |
Audio Output| digital audio output | Optical/Coaxial |
|---|---|
| frequency response | 48kHz Sampling: 4Hz to 22kHz / 96kHz Sampling: 4Hz to 22kHz |
| s/n ratio | 95dB |
Weight and Dimensions| weight | 9.3 Lbs |
|---|---|
| width | 16.9 inches |
| depth | 9.8 inches |
| height | 2.1 inches |
To Next Page
