Memorex MVBD2520 User Manual

13
CONNECTION (CONTINUED)
CONNECTING THE PLAYER TO A TV USING A DVI CABLE
NOTES:
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
•
When using HDMI as your source, setup the HD resolution in the Video menu as described on page 21.
• When you connect the HDMI cable to a TV for the first time, the HDMI output resolution will be automatically set to the highest
provided by the TV.
• Depending on your TV, some HDMI resolutions may not work.

Memorex MVBD2520 Specifications

Power

power requirements	AC120V, 60Hz
power consumption	<25W
standby power consumption	1W

Operating Environment

operating temperature	5°C to 35°C
operating humidity range	10% to 75%

Video and Audio Formats

format disc support	BD (405nm), DVD (650nm), CD (780nm)
video format	AVC (H.264), VC-1, MPEG-2
audio format	DTS, DTS-HD, Dolby Digital, Dolby Digital Plus, Dolby True HD, Linear PCM

Video Output

composite video output	1.0 Vp-p
component video output Y	1.0Vp-p
component video output Pr/Pb	0.70Vp-p

Audio Output

digital audio output	Optical/Coaxial
frequency response	48kHz Sampling: 4Hz to 22kHz / 96kHz Sampling: 4Hz to 22kHz
s/n ratio	95dB

Weight and Dimensions

weight	9.3 Lbs
width	16.9 inches
depth	9.8 inches
height	2.1 inches