Preface
Memotec Inc. 1-5
The basic software set provides support of PowerCell Voice and Data (including legacy
user data) and IP routing over Ethernet, serial or digital ports using PPP or Frame Relay
RFC-1490. Optional software licenses can be procured for support of:
• SkyPerformer satellite access
• TCP Acceleration
• SIP VoIP
• IP header compression
• Link Delay Compensation
• IPv6
1.2.4 SDM-9140
The NetPerformer SDM-9140 is a standalone chassis designed for network convergence
at the branch office and central site level. It is a high speed, low cost, flexible and powerful
unit that supports analog/digital voice and data in a multitude of application scenarios. It is
ideal for locations that require support for up to 16 analog or 120 digital telephony
channels.
The SDM-9140 product line comes in two models: the SDM-9140s (standard model) or
the SDM-9140e (extended model). Both units have a 1U chassis with:
For the SDM-
9140s and
SDM-9140e
• One serial port equipped with HD-26 female connector.
• Two 10/100/1000Base-T Ethernet ports (RJ45 connectors).
• One console port (RJ45F).
• Four expansion slots for analog voice, digital (T1/E1) voice/data and single serial
interface cards.
• Hot swappable AC/DC power supply option.
• All UAC base units come equipped with universal AC power supply and a choice
of 120 VAC North American or 240 VAC European power cord (must be specified
at time of ordering).
• A USB to RJ-45M console cable (Ordering part number: CBLH-CONS-USB) and
19-inch rackmount kit are also included in the product package.
• A custom cable (HD-26 male connector) is required for the serial port, available
from Memotec Inc. or your NetPerformer distributor.
• External clocking options (GPS or OCXO).
• Wireless connectivity option (WiFi & Bluetooth or LTE).
For the SDM-
9140e only
• SFP connection option for the two 10/100/1000Base-T Ethernet ports
• Six additional 10/100/1000Base-T Ethernet ports (RJ45 connectors) connected
through an integrated LAN switch.
• External E1-120 ohms clocking port.
The basic software set provides support of PowerCell Voice and Data (including legacy
To Next Page
Loading...
Need help?
General
