List of Figures
Figure 3-1: Removing the Cover from the SDM-9220/9230 Chassis . . . . . . . . . . . . .3-4
Figure 3-2: Removing the Cover from the SDM-9120 Chassis. . . . . . . . . . . . . . . . . .3-4
Figure 3-3: Location of Optional Hardware on the Main Board. . . . . . . . . . . . . . . . . .3-5
Figure 3-4: Replacing the Cover on the SDM-9220/9230 Chassis . . . . . . . . . . . . . . .3-8
Figure 3-5: Partially Removing the Bottom Card in an SDM-9140 Unit . . . . . . . . . .3-10
Figure 3-6: Removing an FXS or E&M Interface Card From an SDM-9140 . . . . . . .3-11
Figure 3-7: Jumper Connectors J4 and J7 on the Dual Port T1/E1 Interface Card .3-13
Figure 3-8: Location of Interface Cards in the SDM-9120/9220/9230 Slots . . . . . . .3-16
Figure 3-9: Location of Interface Cards in the SDM-9140 Slots . . . . . . . . . . . . . . . .3-16
Figure 3-10: Partially Removing the Bottom Card in an SDM-9140 Unit . . . . . . . . .3-18
Figure 3-11: Positioning an FXS/E&M Card at an Angle to an SDM-9140 Slot . . . .3-19
Figure 3-12: SDM-9120/9140 Rackmount Brackets . . . . . . . . . . . . . . . . . . . . . . . . .3-21
Figure 3-13: SDM-9220/9230 Rackmount Brackets . . . . . . . . . . . . . . . . . . . . . . . . .3-22
Figure 3-14: Completed Rackmount Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . .3-23
Figure 3-15: Four-Wire E&M Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-25
Figure 3-16: Two-Wire E&M Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-25
Figure 3-17: Installing a Ferrite with an RJ-45/RJ-48 Connector . . . . . . . . . . . . . . .3-28
Figure 3-18: Power Cords for the SDM-9220 UAC or SDM-9230 UAC Unit. . . . . . .3-29
Figure 3-19: Harness and Wire for a DC Power Connection . . . . . . . . . . . . . . . . . .3-30
Figure 3-20: DC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-32
Figure 3-21: TIA-232 (V.24) Straight-through Cable with DB-9 Female Connectors3-34
Figure 3-22: USB to RJ-45 Console Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-34
Figure 3-23: RJ-45 Connector of Console Cable . . . . . . . . . . . . . . . . . . . . . . . . . . .3-35
Figure 4-1: Front View of the SDM-9120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
Figure 4-2: Rear View of the SDM-9120. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
Figure 4-3: Front View of the SDM-9220/9230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Figure 4-4: Rear View of the SDM-9220/9230 UAC . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Figure 4-5: Front View of the SDM-9140s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-7
Figure 4-6: Front View of the SDM-9140e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-7
Figure 4-7: Rear View of the SDM-9140 with UAC Power Supply Options . . . . . . . .4-8
To Next Page
Loading...
Need help?
General
