Mercury 4000 MPC GEN II - Template Mounting and Cutout Details

4000 MPC GEN II PISTOL GRIP REMOTE CONTROL INSTALLATION INSTRUCTIONS
90-8M0103111 FEBRUARY 2015 Page 21 / 22
3. The control module shown on the template is mounted horizontally. Refer to item d.
a - Machine screw drill size
b - Remove the sharp edges on the interior and exterior surfaces
c - Cut out only if equipped with a lanyard stop switch
d - Outline of starboard mounted panel control module
25587
7.14 mm
7.14 mm
31.8 mm
108 mm
(9/32 in.)
(9/32 in.)
(1-1/4 in.)
(4-1/4 in.)
b
a
a
7.14 mm
(9/32 in.)
a
c
d