Mercury 60 4-Stroke - Page 116

OUTBOARD INSTALLATION
108
2. Insert the steering cable into the tilt tube.
28507
3. Tighten the nut to the specified torque.
29506
Description Nm lb. in. lb. ft.
Nut 47.5 35
STEERING CABLE SEAL
1. Mark tilt tube 6.4 mm (0.25 in.) from end. Install seal
components.
2. Thread cap to the mark.
a
b
c
d
8041
a
a - 6.4 mm (1/4 in.)
b - Plastic spacer
c - O‑ring seal
d - Cap