Mercury 60 4-Stroke User Manual

MAINTENANCE
72
Propeller Replacement ‑ 87.3 mm (3 ‑ 7/16 in.)
Diameter Gearcase
!
WARNING
Rotating the propeller shaft may cause the engine to crank over
and start. To prevent this type of accidental engine starting and
possible serious injury caused from being struck by a rotating
propeller, always turn the ignition key or lanyard stop switch to
the "OFF" position and remove the spark plug leads from the
spark plugs while servicing.
1. Shift the outboard to the neutral ("N") position.
N
N
28528
2. Remove the spark plug leads to prevent engine from starting.
26899
3. Straighten the bent tabs on the propeller nut retainer.
26900
4. Place a block of wood between the gearcase and propeller to
keep the propeller from turning. Remove the propeller nut.

Mercury 60 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	60 hp
Displacement	995 cc
Fuel System	Electronic Fuel Injection (EFI)
Alternator Output	18 amp / 226 watt
Starting	Electric
Cylinders	4 (inline)
Shaft Length	20" or 25"
Full Throttle RPM Range	5000-6000
Warranty	3-Year Limited Warranty