Mercury 60 4-Stroke User Manual

MAINTENANCE
82
e. Signs of wear on edges or outer surfaces of belt.
26958
Lubrication Points
1. Lubricate the following with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with Teflon.
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft
92-802867Q
1
95
2-4-C with Teflon Propeller shaft 92-802859A1
2. Lubricate the following with Quicksilver or Mercury Precision
Lubricants 2‑4‑C with Teflon or Special Lubricant 101.
Tube Ref No. Description Where Used Part No.
95
2-4-C with Teflon
Tilt support lever,
swivel bracket, tilt
tube, steering cable
grease fitting
92-802859A1
34
Special Lubricant 101
Tilt support lever,
swivel bracket, tilt
tube, co-pilot shaft,
steering cable grease
fitting
92-802865Q0
2
• Tilt Support Lever ‑ Lubricate through fitting.

Mercury 60 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	60 hp
Displacement	995 cc
Fuel System	Electronic Fuel Injection (EFI)
Alternator Output	18 amp / 226 watt
Starting	Electric
Cylinders	4 (inline)
Shaft Length	20" or 25"
Full Throttle RPM Range	5000-6000
Warranty	3-Year Limited Warranty