Mercury 60 4-Stroke User Manual

MAINTENANCE
63
Outboard Care
To keep your outboard in the best operating condition, it is
important that your outboard receive the periodic inspections and
maintenance listed in the Inspection and Maintenance
Schedule. We urge you to keep it maintained properly to ensure
the safety of you and your passengers, and retain its dependability.
Record maintenance performed in the Maintenance Log at the
back of this book. Save all maintenance work orders and receipts.
SELECTING REPLACEMENT PARTS FOR YOUR
OUTBOARD
We recommend using original Mercury Precision or Quicksilver
replacement parts and Genuine Lubricants.
EPA Emissions
EMISSION CERTIFICATION LABEL
An emission certification label, showing emission levels and
engine specifications directly related to emissions, is placed on the
engine at time of manufacture.
e
d
c
b
a
f
g
h
i
21096
a - Idle speed
b - Engine horsepower
c - Piston displacement
d - Part number
e - Valve clearance (if
applicable)
f - Family number
g - Maximum emission
output for the engine
family
h - Timing specification
i - Recommended spark
plug and gap

Mercury 60 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	60 hp
Displacement	995 cc
Fuel System	Electronic Fuel Injection (EFI)
Alternator Output	18 amp / 226 watt
Starting	Electric
Cylinders	4 (inline)
Shaft Length	20" or 25"
Full Throttle RPM Range	5000-6000
Warranty	3-Year Limited Warranty